Best software to use?

More
06 Apr 2021 15:35 #113 by gurmitjaswal
Hello, I read out some of the sections. I found there are three softwares, that we can use for the door business.

which one you recommend that can be fit in budget and user-friendly.
1)Avawre 2)Comsense 3)Pro-tech

I will be waiting for your helpful answers.

Thank you very much.

Please Log in or Create an account to join the conversation.

More
12 Apr 2021 10:21 - 12 Apr 2021 10:22 #115 by SteveB
Replied by SteveB on topic Best software to use?
Gurmit, there are more than those 3 available...that is just the 3 that have been discussed here, at this point.

My comments on these 3:

Comsense - This one is a bit pricey...but well worth it, IMO. Once you spend the time to learn it thoroughly, it can be very useful. As with most of these programs, there is a learning curve with it..but, again, well worth it. There are 2 versions of it - Advantage & Enterprise.

Avaware - Easier to learn than Comsense and not quite as expensive, but still up there in $. A bit easier to learn and lays things out nicely. Definitely a good thorough program and will get the job done.

Pro-Tech - This is made by Assa Abloy, so if you're an Assa distributor it will fit the bill nicely. Less money than the other 2, but also a bit clunky, IMO. Easier to learn than the other 2 as well. Has some quirks you have to work through, but learning it thoroughly will take less time and will also work just fine.

Hope this helps.

Steve Behrens
https://www.commdoor.com/
Last edit: 12 Apr 2021 10:22 by SteveB.
The following user(s) said Thank You: Roadie, LumberGuy, gurmitjaswal

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum